Fluorosilicone Base Iota M2000 Extrusion Type

• Appearance: Liquid
• Usage: Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals
• Color: Translucent
• Model NO.: IOTA M2000
• Transport Package: Plastic Bags
• Specification: 12.5kg per sack, 2 sacks in 1 carton
• Trademark: IOTA
• Origin: Anhui, China
• HS Code: 3910000000

Product Description

Fluorosilicone Base IOTA M2000 Extrusion Type
 

Composition

Uncatalyzed fluorosilicone rubber based on fluorosilicone gun,and mixed evenly with some kinds of fillers and additives

Characteristics

IOTA-R-M2000 is pale-yellow translucent fluorosilicone base, it's suitable for extrusion application. It has

integrated advantages that both the silicone rubber and fluororubber have.

1. Wide application temperature range(-60ºC~200ºC);

2. Similar resistance to  solvent  &fuel oil  to  that of fluororubber;

3. Keeping high tensile force retention at high temperature which is like silicone rubber,

4. High insulation;

5.High selective permeability meets requirements of environmental protection.

Therefore it can be used as seal material in special condition with requirement of resistance to high and/or low temperature,oil and some other chemical mediums.

Items	Testing method	Index
		M2060	M2070
Appearance	Eyeballing	Translucent,smooth surface,without visible impurities
Hardness (Shore A)	ASTM D2240	60±5	70±5
Tensile Strength (MPa)Die C	ASTM D412	≥8	≥7
Elongation at Break (%)Die C	ASTM D412	≥250	≥200
Tear Strength (KN/m)Die B	ASTM D624	≥25	≥20
Compression Set 177ºC 22hr(25%)B type	ASTM D395	≤35	≤35
Volume Change (reference fuel B)(%)(23ºC×70hr)	ASTM D471	≤25	≤25

Properties obtained using 1.5 phr DCBP. Molded 15min at 110 ºC, post-cured 4hr at 200ºC. If other cure temperature needed,vulcanization system shall be changed.
 

Application
1.Suitable for extrusion application.
2.Can be applied in aviation industry,auto industry, petroleum chemical industry,medical and health care industry and military industry
 

Package 
Plastic bags,12.5kg per sack,2 sacks in 1 carton.
 

Storage 
Shall be stored in dry and ventilated places at room temperature (25ºC).Validity is 1 year.

Transportation 
Transport it as non-dangerous cargo.

Attention
1.The product shall be kept neutral,avoid being contacted with acid,alkaline substance.

2.The product can flow under its own weight. Keep it in good condition of packing during transportation and application in order it not to flow out.