| EINECS: | 000-00-0 |
|---|---|
| Molecular Principal Chain: | Carbon Chain Polymer |
| Color: | Light Yellow Transparent |
|
Still deciding? Get samples of US$ 11/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Epoxy-modified silicone resin IOTA H-60
Characteristics and application:
This product has a relatively excellent resistance to high and low temperature, hydrophobic moisture resistance and good electrical insulation properties, arc resistance corona performance. Its weather resistance and chemical stability, corrosion resistance is also very good.
This product is widely used as high-temperature anti-corrosion coatings (200 ~ 400 ºC) , insulation coatings and weather-resistant coating, etc., can be completely cured two-component at room temperature. Compared with IOTA H-30, it has better corrosion resistance, high temperature resistance slightly poorer.
Data:
Appearance: Light yellow transparent liquid,allowing opalescence, no mechanical impurities
Solid content: 50±1%
Viscosity: 40-80 seconds (No 4 cup)
Epoxy value: 0.045~0.085
Uses:
A: two components solid at room temperature. Could be used with 650 polyamide or T-31. The 650 adding amount is about 20~25% of the resin total amount. TheT-31 adding amount is about 10% of the resin total amount.
B: Oven curing at high temperature, it fully solidified after 1 hour at 180ºC. It could be cooperate with other amino resin to shorten the solidification time.
Notes:
a. The diluting solvent used in this product should not contains water, sulfur-containing compounds and impurities, otherwise it will affect the resin film adhesion, dry and other properties.
b. There will be a lot of xylene and other flammable, toxic solvents evaporate during the production process, we should pay special attention to strengthening the field of ventilation, attention to fire safety, strict cut off the source of fire. The operator should pay attention to labor protection.
c. The processing equipment, utensils must be clean during the production process. To prevent dust,foreign matter and water.
d. The products such as acid,alkali,salt of organic acid amine compounds has Accelerate the solidification effectiveness for this product, and will influence the heat resistance and electrical properties. So, this product should be isolated with those products when storing.
Storage:
This product should be stored in ventilated, cool, dry place to prevent direct sunlight exposure; to prevent serious pollution of acid, lye, and should be cut off from sources of ignition away from heat, the product storage period is six months.
Packing:
25kg white iron drum, 200kg white iron drum
){kind=link}