| Type: | Synthesis Material Intermediates |
|---|---|
| Appearance: | Liquid |
| Quality: | Refined |
| Colour: | White |
| Shear Strength: | 1.15MPa |
| Volume Resistivity: | 1×10-15 Omega;Cm |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier IOTA 855 Silicone Sealant for Solar Modules
Features:
1.Good adhesion to PV substrates
3.Good weatherability and ozone resistance
4.Sufficient protection of wafers from contamination or oxidation
5.Protects from mechanical shocks and chemical mediators
6.Good weatherability and ozone resistance
COLOURS
IOTA 855 is available in white and other customized colors.
PACKAGING
IOTA 855 is available in disposable cartridges (net 300ml), or sausages (net 600ml), or drums (net 188L,about 250kg).
Typical properties:
These values are not intended for use in preparing specifications
|
Test Method |
Property |
Unit |
Result |
|
|
GB/T 13477 |
Appearance |
|
fine paste |
|
|
GB/T 13477 (ISO 7390) |
Slump |
mm |
0 |
|
|
GB/T 13477 (ASTM D 2377) |
Tack free time |
min. |
15 |
|
|
GB/T 13477 (ISO 7619) |
Hardness |
Shore A |
40 |
|
|
GB/T 528 (ISO 37) |
Tensile strength |
Initial strength |
MPa |
2.0 |
|
85ºC,85% RH,1000h |
MPa |
1.3 |
||
|
GB/T 528 (ISO 37) |
Elongation at break |
Initial strength |
% |
320 |
|
85ºC,85% RH,1000h |
% |
320 |
||
|
GB/T 7124 (ISO 4587) |
Shear strength |
MPa |
1.15 |
|
|
GB/T 1695 (ASTM D 149) |
Dielectric break down strength |
kV/mm |
15 |
|
|
GB/T 1692 |
Volume resistivity |
Ω·cm |
1×1015 |
|
|
GB/T 2048 |
Fire resistance rate |
|
94HB |
|
|
|
Cure time,2mm |
h |
24 |
|
STORAGE AND SHELF LIFE
IOTA 855 should be stored in original unopened containers over temperature from 4ºCto 27ºC. It has a shelf life of 9 months from the date of manufacture.
IOTA 855 is solvent free, non-hazardous goods for transportation.
HOW TO USE
Apply a bead of IOTA 855 to one of the prepared surfaces, then quickly cover with the other substrate be bonded and remove the excessive sealant.
Tool immediately before a skin forms
A plug of used material may form in the tip of a tube or cartridge during storage. This is easily removed and does not affect the remaining contents.
Air pressure should be maintained at 0.2~0.4 MPa when using pneumatic gun.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}