Medium and Low Pressure Casing Liquid Silicone Rubber Iota 7635 for Cold Shrink Terminal Cold Shrink Insulation Pipe Middle Joint and Three Finger Set.

• Appearance: Liquid
• Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals
• Color: Gray
• Density(g/cm3): 1.13
• Hardness(JIS): 35
• Tensile Strength: 8.5
• Model NO.: Medium and Low Pressure Casing Liquid Silicone Rub
• Tear Strength: 30
• Transport Package: 20kg/Barrel; 200kg/Barrel
• Specification: 20kg/barrel; 200kg/barrel
• Trademark: iota
• Origin: Bengbu Anhui China
• HS Code: 391000
• Production Capacity: 800t/Moth

Product Description

Medium and Low Pressure Casing Liquid Silicone Rubber IOTA 7635

 

Product description:The product is a double component, leak-resistant electric marks of the formed liquid silicone rubber.

Product features:

· Low viscosity injection molding
· Excellent hydrophobic
· High leak resistant electrical marks, anti-fouling
· Anti-UV and ozone, anti-aging

Application field:Cold shrink terminal, cold shrink insulation pipe, middle joint and three finger set.

Product performance:

ITEM	Standards	IOTA 7635	IOTA 7645
1. Appearance	/	Gray	Gray
2. Viscosity(A/B agent,mPa.s)	GB/T 5561-1994	600	600
3. Density(g/cm3)	DIN 53479	1.13	1.13
4. Hardness(JIS)	DIN 53505	35	35
5. Tensile strength(Mpa)	DIN 53504	8.5	8.5
6. Tear strength(KN /m)	ASTMD 624B	30	30
7. Extension rate	DIN 53504	800	800
8. Volume resistivity	IEC60093	1.9×1014	1.0×1015
9. Dielectric constant	IEC60250	2.8	2.8
10. Loss factors	IEC60250	0.0016	0.0016
11. Leak proof	IEC60587	1A3.5	1A4.5
12. Dielectric strength	IEC60243	26	26

 

Storage conditions:sealed in a cool, dry vent.

Shelf life:six months.

Packing specifications:20kg/barrel; 200kg/barrel;

Note:

Application:

1.The tools for taking agents a and B should be distinguished from or wiped clean before use, so as to avoid the combination of the two resulting in local clots and not normal use.
2.In use, avoid contact with chemical compounds containing N, S, P and Sn, or cause unvulcanization or incomplete vulcanization.

Safe:

1.When applying the products, pay attention to labor protection wear, avoid warm burns during construction, and prohibit consumption.
2.Be careful with this product, pay attention to safety before and when using it. In addition, it should comply with the relevant national or local security regulations. (See corresponding MDS for detailed safety guidelines).