| CAS No.: | 2530-85-0 |
|---|---|
| Formula: | CH2=C(CH3)Coo(CH2)3si(Och3)3 |
| EINECS: | None |
|
Still deciding? Get samples of US$ 10/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
IOTA-570 3-Methacryloxypropyltrimethoxysilane
Molecular Formula: CH2=C(CH3)COO(CH2)3Si(OCH3)3
CAS NO.: 2530-85-0
Determined on commercial material whose properties may vary within the specification limits.
|
Physical Form |
Light yellow to Clear liquid |
|
Colour, Pt-Co |
Max 25 |
|
Specific Gravity at 20°C, g/cm3 |
1.043~1.053 |
|
Refractive Index, nD 25°C |
1.4285~1.4310 |
|
Purity, % |
Min 97.0 |
The methacryloxylsilane produced by silane IOTA-570.
1. Significantly improves composite strengths when the composite is reinforced with fibreglass roving sized with a typical polyester-compatible formulation. These formulations normally incorporate silane coupling agents, film-forming resins, lubricants and antistatic agents.
2. Enhances the strength performance, both initially and after wet-conditioning, of cured polyester resin composites filled with silica, glass, silicates and many metal oxides.
3. Enhances the wet electrical properties of many mineral-filled composites, such as crosslinked polyethylene and polyvinyl chloride.
4. May be copolymerized with vinyl acetate and acrylate or methacrylate monomers to prepare silylated polymers that are moisture-curable. These silylated polymer may be used in coatings, adhesives and sealants to provide superior adhesion and durability.
Silane IOTA-570 is soluble in ethanol, methanol, isopropanol, acetone, benzene, toluene, and xylene. After hydrolysis it is soluble in water with adequate stirring if the pH is adjusted to 4.0. Hydrolysis releases methanol.
1. Silane IOTA-570 has found its utility in the manufacturing of many intermediate goods such as: unsaturated polyester, ethylene- propylene diene copolymer, polystyrene, ABS, polyurethane, polybutadiene and polyethylene crosslinked by peroxide. For the finished goods like polyester reinforced material, Ethylene- propylene-non-conjugated diene cable and so on. Modified by silane coupling agent, dihydrate gypsum gesso, can not only be used as filling of artificial marble to reinforce the bending strength of board but also greatly reduce the production cost of artificial marble.
2. Glass Fibre Soakage Agent, Glass fibre soakage agent is used in the treatment of glass fiber. It contains film former, lubricant, antistatic, silane coupling agent and water etc. The concentration of the silane coupling agent should be of 0.3%-0.6%.
3. Electrical wire and cable, when used in electrical wire and cable, silane IOTA-570 can greatly improve its mechanical performance and electrical performance in wet state. When applied in argil, silane IOTA-570 can dramatically better the consumption factor, inductance and capacitive reactance of the EPM (ethylene propylene monomer) and EPDM (Ethylene- Propylene-Diene Monomer) systems crossed linked by peroxide and filled
with argil.Silane IOTA-570 results 2.5 times better than vinyl silane with the same dosage.
4. Filler Treatment, This silane can improve the mechanical strength of polyester composite materials made from filling white carbon black,glass, silicate and metal oxide in either dry or wet state, for instance, crosslinked polyethylene and polyvinyl chloride.
5. Adhesive and Coating, Silane IOTA-570 can be applied in acrylic resin and polyester adhesive in the purpose of improving its water resistance and adhesion stress with inorganic material, and also lowering its solidification value.
Stored in cool and dry place, avoiding water, tinder, heat source and light, the validity period will be 6 months on such condition.
1. 25KGS/Plastic Drum
2. 200 KGS/Steel Drum
3. 1000KGS/IBC
Iota Silicone Oil (Anhui) Co., Ltd was established in 2010, located in Bengbu, Anhui Province, which is the manufacturing operation of Iota Corporation Limited in China. As a member of Iota Corporation Our company covers an area of 30,000 square meters and a construction area of 24,000 square meters.
Iota Silicone Oil maintains close long-term cooperative relationship with many universities and research institutes in Nanjing and implements a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment. Technical support and scientific management of the powerful can provide all kinds of high quality organic silicon materials for our customers.
Our main products: Phenyl silicone, diffusion pump oil, Methyl silicone oil, Amino silicone oil, Hydroxy silicone oil, Vinyl silicone oil, Organic polysilazane, Inorganic polysilazane, Foam silicone rubber, Hexamethyldisilazane. Iota enjoy high reputation in our market for Phenyl silicone, Polysilazane resin, Foam Silicone and Hexamethyldisilazane.
Our products are mainly exported to Southeast Asia, South America, Europe, America, the Middle East and Medium-High level China market.
Thanks for your interest in Iota Silicone Oil, We look forward to doing business with you!
){kind=link}