Iota M3060 Ab Self Adhesive Liquid Silicone Rubber for Mobile Phone SIM Card Sealing Parts/Smart Watch Rear Cover Sealing Parts/Mobile Phone Case Rubber Coating

• Appearance: Liquid
• Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals
• Color: White
• Hardness (Shore a): 1.138 g/cm3
• Tensile Strength: 10 MPa
• Elongation: 450 %
• Model NO.: Self adhesive liquid silicone rubber MY M3060 AB
• Tear Strength: 40 Kn/M
• Transport Package: Component a: 20 Kg/Drum, Component B: 20 Kg/Drum.
• Specification: Component A: 20 Kg/drum, component B: 20 Kg/drum.
• Trademark: iota
• Origin: Bengbu Anhui China
• HS Code: 391000
• Production Capacity: 800t/Moth

Product Description

Self adhesive liquid silicone rubber IOTA M3061

Description 

IOTA M3061 A/B is a two component liquid silicone rubber with self-adhesive property to PC, and has good mold release property.

 

Features

Two component, 1:1 mixing ratio

Excellent mold release

Excellent self adhesion to PC

Rapid thermal curing

Excellent mechanical properties

 

Applications

Sealing of swimming goggles

Mobile phone protective case rubber coating

Smart watch back cover sealing ring

Mobile phone card holder seal, etc
 

 

NOTES 

1. IOTA M3061 is a platinum catalyzed product. The platinum catalyst is in the component A. Strict attention should be paid when using, to avoid catalyst poisoning. 

2. Only components A and B of the same lot number can be mixed together.

3. To ensure optimum fluidity and homogeneity of the material, the material must be thoroughly agitated before being transferred to the container to disperse any sedimentation that may occur during the storage period. 
 

 

Technical index:   

Properties	Test Method	Value
uncured
Component A
Viscosity at 23ºC, stirred	ISO3219	300mPa.s
Component B
Viscosity at 23ºC, stirred	ISO3219	500mPa.s
Product data (A+B mixed)
Viscosity at 23ºC, stirred	ISO3219	400mPa.s
Curing time		See curing conditions
Product data (after cured)	(23±2ºC, after curing for 24h)
Density 23ºC		1.14 g/cm^3
Hardness (Shore A)	DIN 53505	60
Tensile Strength	DIN 53504	10.0MPa
Elongation	DIN 53504	450%
Tear Strength		40KN/m

 

Packaging

Component A: 200 Kg/drum, component B: 200 Kg/drum.
 

 

Storage

1. Below 23°C, unopened barrels can be stored for 12 months, and the best use-by date is marked on the label of each product's outer packaging.

2. After the expiry date, it is necessary to do performance tests for relevant indicators to ensure the quality, and then could be used.