Polyethylsiloxane Fluids Iota 2056 Pes Pdms 63148-61-8

• CAS No.: 63148-61-8
• Formula: None
• EINECS: 63148-61-8
• Appearance: Liquid
• Usage: Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Cosmetics
• Color: Colorless
• Model NO.: IOTA 2056
• Transport Package: Drum
• Specification: 25kg or 200kg
• Trademark: IOTA
• Origin: China
• HS Code: 39100000
• Production Capacity: 1000ton/Month

Product Description

Product name:Polyethylsiloxane Fluids IOTA 2056 PES

CAS No.: 63148-61-8
 

Specific properties of polyethylsiloxane fluids are their full compatibility with mineral and synthetic oils, excellent lubricating properties, low gel point (below -70°C) and inertness towards structural and functional materials(metals, alloys, plastics, polymers, rubber, etc.)

Polyethylsiloxane fluids are colorless, odorless, chemically inert. They are soluble in aromatic and chlorinated hydrocarbons, insoluble in lower alcohols and water. Polyethylsiloxane fluids are non-toxic, explosion-proof.

Technical index:

Item	IOTA 2056 PES -1	IOTA 2056 PES-2
Appreance	colorless to pale yellow liquid
Viscosity at 25°C, mm^2/s	34-40	180-280
Refractive Index, 25°C	1.44	1.44
Flash point, °C	>170	>265
Density at 20°C g/cm^3	0.95-0.98	0.99-1.02
Solidifying point, °C	<-70	<-70
Acid value, KOH mg/g	<0.1	<0.1

Application
IOTA 2056 PES Polyethylsiloxane fluids are used in hydraulic systems( cooling and power fluids), in instruments (lubricating oils), as well as they serve as low-temperature oil base.

These fluids provide a stable operation of instruments and mechanisms in the Far North. The good dielectric properties of polyethylsiloxanes allow using them as instrumental fluid in electro mechanisms. They are used at the operating temperature from minus 70-150°C.

In chemistry and petrochemistry:

• Basic element of textile composition used in cord tissue for tire industry. It reinforces fibers, improves tire quality
• Release agent and modifier in molding materials, glass-reinforcedplastic
• Anti-dust additive in pigment manufacture
• Heat transfer agent operating at 150-200°C in open systems and at 180-250°C in closed ones
• Release emulsion base at compounded rubber plants
• Plasticizer in the manufacture of rubber products
• The base of general-purpose greases

In cosmetics:

• Cream base, additive to lipstick and mascara.

In aircraft and car industry:

• Damping fluid, liquid grease, shock absorbing fluid base, heat transfer agent.

Packaging and Storage
1. 50 kg polyethylene plastic buckets or drums 200 kg
2. Should be stored airtight in a dry and ventilated place, avoid acid, alkali substances.
3. Non-dangerous goods storage and transportation.