| Appearance: | Liquid |
|---|---|
| Usage: | Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals |
| Color: | Pale-Yellow or White |
|
Still deciding? Get samples of US$ 50/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Fluorosilicone Adhesive IOTA R-A001
Product Information
IOTA-R-A001 is suitable for bonding un-vulcanized fluorosilicone rubber with metal, like iron, steel and alloy, also has good adhesion effect with nylon, polyester, aramid and etc.
Description
|
Component |
Fluorosilicone polymer,solvent,other additives |
|
Appearance |
Pale-yellow or white liquid |
|
Shelf life |
One year at room temperature as sealed |
|
Package |
100g;1kg;5kg;10kg |
Characteristics
Excellent water resistance and gas tightness
Wide application temperature range: -60ºC~200ºC
Chemical reagents and oil resistance
Good adhesions with different materials and non-corrosive to metals while being cured
How to use
1.Surface treatment:
A: For metal: mechanical treatment(grit-blast), then degreasing, or use chemical methods to remove greasy diit, rust or other oxided layer;
B: For fabric: chemical treatment (steep fabric in 10%NaOH for 1 hour), then dry.
2. Dilution: coating directly, or can be diluted with ethyl acetate, toluene etc. To 50%~200% (volume ratio).
3.Coating:brushing, dipping or spraying. Recommend the coating layer to be 0.03~0.08mm.
4. Dry: dry at room temperature (25ºC~30ºC) for 30mins, higher temperature(70ºC~90ºC) for 8~15mins. Could get better effect to dry at lower temperature with faster gas flow.
5. Vulcanization: cure first stage at 170±5ºC@10~15min, post-cured at 200ºC@4hr:
Package
Plastic drums. Each drum is 100g/1kg/5kg/10kg.
Storage
Shall be stored in dry and ventilated places at room temperature (25ºC).Validity is 6 months.
Transportation
Transport it as non-dangerous cargo.
Attention
1.Keep it intightly closed container, store at cool and dry place. Keep it away from heat and fire.
2. Should treat metal after surface treatment in time before oxided layer generates again; better finish coating in 2 hours after metal or fabric surface treatment.
3.If mucilage has some small amount of precipitation, stir it well before applying.
4.Bonding after coating and drying immediately, avoid being contaminated and in touch with humid air.
){kind=link}