CAS No.: | 70131-67-8 |
---|---|
Formula: | Ho[(CH3 ) 2 Sio]Nh |
Appearance: | Liquid |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Description
Addition type liquid silicone rubber IOTA-3405A/B is a two-component platinum catalyzed transparent silicone elastomer. After mixing the A/B components, it solidifies to form a soft material with buffering properties and certain adhesive strength. This liquid silicone rubber has unique physical properties and is suitable for high-precision electronic encapsulation and filling. Composed of platinum catalyzed polydimethylsiloxane, the curing temperature range is from room temperature to 200 ºC, and no by-products are produced.
Applications
Resist moisture, dirt, and other atmospheric components, reduce mechanical stress and tension caused by mechanical, thermal shock, and vibration, at -50-200 ºC stable mechanical and electrical performance, self-healing. It is an ideal choice for protecting sensitive electronic components in extreme environments.
Solvent free two-component system.
Low viscosity before curing, easy to process.
Excellent softness and stress free.
Extremely low oil permeability and shrinkage after curing.
Typical Characteristics
Properties |
Value |
Uncured |
|
Component A |
|
Appearance |
Colorless translucent fluid |
Density 25°C,10S-1 |
0.99-1.03 g/cm3 |
Viscosity at 25ºC, stirred |
40000-60000(Customizable) |
Component B |
|
Appearance |
Colorless translucent fluid |
Density 25°C,10S-1 |
0.99-1.03 g/cm3 |
Viscosity at 25ºC, stirred |
40000-60000(Customizable) |
Product data (A+B mixed) |
|
Mixing ratio (weight) |
1:1 |
Viscosity at 25ºC, stirred |
40000-60000(Customizable) |
Curing time |
See the curing condition |
Product data (after cured) |
|
Flame retardant grade |
UL94V-0 |
Viscosity at 25ºC, stirred |
40000-60000 |
Appearance |
Colorless semi transparent gel with hardened appearance |
PH value |
6-8 |
Hardness (Shore A) |
3-8 |
Breakdown resistivity (MV/m) |
≥ 20 |
Volume resistivity(Ω. cm) |
1.0 * 1014 |
Dielectric constant (1MHz) |
3.2 |
Electric strength (KV/mm) |
18 |
Temperature range for use(ºC) |
-60~200 |
Shrinkage rate(%) |
< 1.5 |
Water absorption rate(Long term soaking,%) |
<1.0 |
Curing condition
1.The operation time after mixing, min (25 ºC)>3H min, varies according to room temperature changes (adjustable)
2.Hardening conditions, ºC/hr less than 25 ºC/24h or 100 ºC/10 mins (adjustable)
Note:
1. The operation time is tested based on a glue dosage of 100g. All data on the curing state were measured after 7 days of adhesive curing at 25 ºC and 55% RH.
2.Cleaning: (before curing) n-hexane, benzene, toluene, xylene
Cleaning: (after curing) n-hexane, benzene, toluene, xylene
Operation Process
1. Weigh components A and B in a 1:1 ratio, mix them evenly, let them stand for 10 minutes, and then inject them into the module. It is best to slowly inject along one side to reduce the generation of bubbles.
2. Let the sealed components stand still and allow them to bubble out on their own. After the bubbles have basically disappeared, they can be heated and cured (at 120 ºC, it takes about 20-40 minutes, depending on the thickness of the adhesive layer). They can also be cured directly at room temperature, which takes about 6-10 hours.
Precautions
1. Vacuum defoaming of A/B components after mixing can improve product performance.
2. Components A and B should be sealed and stored after use.
3. Low temperature can cause slow curing speed, it is recommended to heat and cure.
4. It is difficult to solidify when in contact with sulfur-containing, amine, and tin materials.
Packaging specifications
Component A: 25KG plastic drum/iron drum; Component B: 25KG plastic drum/iron drum
Component A: 200KG iron drum; Component B: 200KG iron drum
Storage and transportation
Storage period of 1 year (25 ºC); This product should be stored in a dark, heat-resistant, and sealed manner. It is a non hazardous material and should be transported and stored as a general chemical.
As a leading supplier in organic silicon industry, silicon-based technology and innovation area, we provide the whole industry chain silicone performance solutions.
We serve the market in various fields, covering textiles and leather, food and beverages,paints, oil and natural gas, cosmetics, electronics, aerospace, automotive, construction, medical care, casting, personal care, agriculture, and LED.
We provide multiple logistics methods to ensure that the products you need are delivered to your receiving location as quickly as possible .
1. Are you a manufacturer or trading company ?
We are a manufacturer ,located in Bengbu , Anhui Province , China .