Silicone Resin Adhesives Mica Tape Cable Iota 3952A

• CAS No.: 67763-03-5
• Formula: None
• EINECS: None
• Appearance: Liquid
• Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals
• Color: Colorless Transparent Liquid
• Model NO.: IOTA 3952A
• Transport Package: Drum
• Specification: 200L
• Trademark: IOTA
• Origin: China
• HS Code: 39100000
• Production Capacity: 1000ton/Month

Product Description

Product name: Silicone adhesive of IOTA 3952
Description:It has high heat resistance, softness and good insulation and moisture resistance, and is suitable for the production of fire-resistant mica tape and pressure-sensitive tape. Low smoke, non-toxic, good stability, high temperature resistance, no carbon deposition, excellent weather resistance, moisture resistance, electrical insulation, and adhesion, adhesion, cohesion, and anchoring force. Its performance is better than similar foreign products.
 

 

Technical index
Appearance: Colorless or pale yellow homogeneous liquid, no mechanical impurities Viscosity(25ºC,cp): ≥30000
Density(25ºC,g/cm³): 1.0±0.02
Solids content (150°C, 2h, %):60±2
Packaging and Transport
Put it into a clean and dry 200kg iron drum and seal it with a lid.
Store at room temperature (0~35ºC).
The storage period is 6 months (it can still be used after passing the inspection), prevent direct sunlight, and store and transport as flammable products.
How to use
It is a quick-drying adhesive, with short curing time and strong stickiness.
After curing, the mica tape is dry, soft, and will not stick.
Solvent: toluene, xylene

1.Glue concentration: 14~18%
2.Amount of curing agent (BPO or DPP): 1.5-3.0%
3.Curing temperature:The low temperature zone- 80~100ºC. the middle and high temperature zone-140~150ºC.
the high temperature zone- 150~160ºC.
Norma It can be cured in 3~5 minutes.

4.In order to ensure the mixing of the curing agent and the adhesive, first dissolve.The Curing agent completely in the solvent and then add it to the glue solution, stir and mix well.